Semi-automatic paper feeding and gluing machine is equipped with vacuum to suck and blow paper, fore-end suck and feed, stably and accurately, suitable to use hot melt glue (jelly glue) or cold glue (water based adhesive) and delivery belt with suction. The suction on the delivery belt ensures that the glued paper is in the same position on the belt. The machine can come with an optional sensor on the belt to stop the product at a pre-determined position to allow the operator to place the board on the glued paper. A push bottom will allow the operator to restart the automatic feeding option and the belt. 

This machine is good for both short and long runs to manufacture many products, such as game boards, hard cover for books, rigid boxes, advertising displays, laminated products and so on.

Machine Features:

1. Main frame variable frequency speed control.

2. Equipped with timing heat and constant temperature system.

3. Automatic sheet-feed front edge suction for various sheet sizes.

4. Adjustable rollers apply smooth glue coating on the sheet surface.

5. The circulating glue system with temperature controller assures the adequate glue consistency.

6. Conveyor equipped with air-suction system to forward sheet flat and stably.

7. With ball bearing design of feed table, the sheets are conveyed straight-through by pressure system.